69 Camaro, Angry Pumpkin
 

I dropped by my motor shop and my motor is coming together. It's a procharged motor wet sump motor. I'm going to run a D1SC with the helical gear set. Mild cam so it's hopefully somewhat of a sleeper when it's idling. Wiseco pistons, K1 rods, ls7 heads with upgraded valves/springs. Fast 102 intake. Goals for boost are about 15lbs, we'll see depending on how much the motor makes on the dyno NA. Goal is 900hp hopefully a bit more. Taking a page from the ls9 and going with piston squirters. The car is a 69 camaro with a T56 from D&D. Short block is being assembled just waiting on heads. Woo hoo!!!

Just saying

http://i73.photobucket.com/albums/i2...c/IMAG0217.jpg
http://i73.photobucket.com/albums/i2...c/IMAG0216.jpg Motor is done, just waiting to install, wire and plumb the d1sc/supercharger.

sub frames burner in. Cage should be done in the next week or so.
http://i73.photobucket.com/albums/i2...ovic/photo.jpg

setting ride height on chassis table
http://i73.photobucket.com/albums/i2...vic/photo1.jpg

BFG 345/30/18s on 18x12s

http://i73.photobucket.com/albums/i2...gejpeg_2_7.jpg

Couple of shots prior to tear down
http://i73.photobucket.com/albums/i2...504-1327-1.jpg
http://i73.photobucket.com/albums/i2...504-1326-1.jpg

Shock bar tacked in

http://i73.photobucket.com/albums/i2...vic/photo3.jpg
Wheels before I powder coated/widened
http://i73.photobucket.com/albums/i2...626-2033-1.jpg

Very cool.
Looks like a great build. I like your engine specs!:unibrow:

Thanks.

More pics

ladder bar cross member
http://i73.photobucket.com/albums/i2...rossmember.jpg
http://i73.photobucket.com/albums/i2...barcloseup.jpg


Fabricated housing
http://i73.photobucket.com/albums/i2...ic/housing.jpg
http://i73.photobucket.com/albums/i2...ingbracket.jpg
http://i73.photobucket.com/albums/i2...ngbracket2.jpg

Very Nice.Will keep watching this one.:thumbsup:

Ditto!!!

Thanks guys. I'm sure many can relate but this has spiraled out of control a bit.

Fuel cell mounted

http://i73.photobucket.com/albums/i2.../fuelcell1.jpg
http://i73.photobucket.com/albums/i2.../fuelcell2.jpg
http://i73.photobucket.com/albums/i2...uelcelltop.jpg
http://i73.photobucket.com/albums/i2...cellbottom.jpg

Shock tabs plated
http://i73.photobucket.com/albums/i2...c/shockbar.jpg

Had to modify the stock style DSE control arms for the coilovers. Obviously not done.

http://i73.photobucket.com/albums/i2...controlarm.jpg
http://i73.photobucket.com/albums/i2...armcloseup.jpg
http://i73.photobucket.com/albums/i2...larmbottom.jpg

Rear bars, tin work and tubs are next.

Very nice, who makes those wheels?

The wheels are Intro G-Cubes

That does tend to happen. Seems to be the biggest challenge...keeping a build under control.

:lol: