Speedtech Second Gen Torque Arm
 

Well it has been a bit of a wait, Speedtech now has 2 versions for the 70-73 and 75-81
3" exhaust over the rear end is not an issue. 345 tires with NO FLOOR CUTTING. mini tub required obviously. ride height as low as the tire to fender well will allow. sa with the firs gen the only welding required is the rear shock cross member.
price with QA1 shocks is 2199.99 ridetech shocks are 250.00 upgrade.

http://i1235.photobucket.com/albums/...a/DSC_1400.jpg

http://i1235.photobucket.com/albums/...a/DSC_1395.jpg

Gorgeous love the cut outs..

That is sweet.....I'll have to get me one of those set up's!!! :thumbsup: :lol:

Better hurry up Steve or someone will beat you to it! :thumbsup:

Nice job Blake! :cheers:

Available for the 10bolt?

Wow!! Very Well thought out.Everybody come's out w/the neat stuff after I spend hour's in the garage trying to build my own junk.:willy:

For that price it comes with the 9 inch housing? Can you use the 10 bolt? Why no 74?

No 9" Housing for the 2195 price if you want a complete bolt in 9" with Strange 31 spline axles S case any gear ratio, brackets welded on fully assembled it is another 2995.00 710.00 if you just want the housing.

10 bolt is a posibility yes have to get to making some pinion mounts but other than that we can do a 10 bolt

Typo on the available years 74 seems like a bit of a bastard year as that is when they changed the floor pans. so either way we can do it. probably need a picture of the pan to verify which X memeber to send

Very good. I'm still in the rust repair part of my build but i eventually planned on some sort of Torque Arm rear, BMR's pretty much the only option for a prebuilt setup right now.

WERE....... past tense