GMPP L92/L76 Aluminum intake, 92mm TB, 4150 elbow, Mast rails, FIC 160lb injectors
 

http://i48.tinypic.com/2rqyqgk.jpg

http://i50.tinypic.com/ic0c43.jpg

All of this is brand new, never been run.

GMPP L92/LS3 intake manifold, fuel injected. GM part # 25534416 - SOLD!

AAron's 6061.com intake elbow. Standard height, 90 degree, forward facing, bung plate - 190$

Mast Black Label fuel rails - 260$ with all the line and fittings shown (that over 160$ in plumbing alone. Dual -8 feeds with a -10 Magnafuel Y feed. This is the most efficient highest flowing configuration)

FIC (fuel injector connection) Flow Matched Bosch 160 High impedance injectors. EV1 connectors. - 900$ for the set of 8. Never seen fuel!


92mm Fast knockoff TB - 160$


I will package price things!

Will you separate? Might have interest in manifold?

Yes I will separate everything

Do you happen to know if the Mast rails will work on a stock L76/LS3 intake? Happen to have the Mast part #? If they will work I am interested

Yes they will work with a stock plastic manifold with short injectors, that's what they were intended for. I don't have the part # because Mast doesnt make them anymore that I know of



Blake