Ford T56 VSS connector?
 

Anyone know where to get the parts for this connector, body, terminals & seals?

When I've ordered my T56s directly from tremec I've ordered them with the connector. It comes loose in the box so unfortunately I don't have a PN for you. Have you tried a Ford or GM dealer? I'm not sure if either/or use the VSS in the trans but that may be a possibility.

Otherwise I would try any of the number of guys selling modded T56s. Break open your favorite car mag and there will be half a dozen in there.

Try American auto wire and summit
http://www.summitracing.com/parts/cm...commendedparts

Check with Pico, they have it...PN 5755

I believe you're looking for this connector.

CAD Drawing


Page 9/10 shows the connector pins and seals
https://delphi.com/connectors/assets...hure/gt150.pdf


I've been ordering all my Delphi plugs from Mouser. If you're able to crimp the pins you can for far cheaper than the places that sell the plug with pigtails.

Nope not it, that is the one for the stock GM T56. The Magnum uses a Ford connector.

It looks like:
http://www.transmissioncenter.net/HPIM1654.JPG

Sure I can buy this connector pig tail, I have already bought one, i prefer to find the connector body & terminals & crimp them on.

Check with the Ford guys at the dealer, you can buy or get the pin terminals from them. I had a bunch of random pins just layin around. Since you have a pig tail all you have to do is take it apart. Easy.

oh I see the problem... Ford parts in a GM. :snapout: Just swap the sensor for a propper GM version. :lmao: