which master are u using
 

Im running wilwood 6 piston front and wilwood rears. What master are u using (non power). Trying to get rid of a hard pedal.Brakes are up under the dash so space is tight.
http://www.competition-specialties.c...o/engine01.jpg

I have one of wilwoods pedal kits.....for my car! Do you need the bore size???

Trivis
Im running a wilwood now 1in bore and the petal is too hard ,going to try a 7/8 and see if its any better. Just wondering what every one is using with (non power) big brakes .

I have the Wilwood 6 piston (front) and 4 piston (rear) set and was told to use a 1 1/8" bore for non-power, so I bought a late model S10 master, hope it works!!

awr68
I was told to use a smaller bore (7/8), who told u to use a 1 1/8 ??

Use a smaller bore for lighter pedal feel. I have a 7/8 on six piston wilwood fronts and the pedal is still very hard to push.

Thats what I was told too.

It was either Wilwood or Precision...pretty sure it was Wilwood though....
Does the stroke have anything to do with it??? (Allan leave that one alone!!)

Ya there diff pedal ratios
I talked to wilwood and they said smaller bore?
Im going to check psi at the caliper.

I have hydroboost and the new 6 piston baers front and back with a 1-1/8 bore . My pedal feels perfect !