Lateral-g Forums - Header help

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Engine (https://www.lateral-g.net/forums/forumdisplay.php?f=37)

- - Header help (https://www.lateral-g.net/forums/showthread.php?t=46373)

jblaine86

06-01-2014 06:19 PM

Header help

I have a 69 camaro that has a sbc 383 stroker (gen I block) that I have lowered 3 inches from stock height. I was wondering what headers to use? The car will have a pypes CROSSFLOW W/ X-PIPE SYSTEM SGF70. The stroker also was on a dyno with hooker super comps and made 457 hp and 478 lbs of torque.
Thanks,
Jon

Vince@Meanstreets

06-01-2014 07:45 PM

Quote:

Originally Posted by jblaine86 (Post 553745)

these have worked for me in the past. you'll need a mini starter.
http://www.summitracing.com/parts/dt...1310/overview/

Sieg	06-01-2014 08:05 PM

Doug's D368's also 'snug up' nicely.

http://photos.smugmug.com/photos/i-9...9s6ZtPV-XL.jpg

http://photos.smugmug.com/photos/i-q...qNz49Cd-X2.jpg

toddoky

06-02-2014 04:29 AM

What cylinder heads, transmission and transmission crossmember are you using on your set-up?

Sieg	06-02-2014 06:27 AM

Quote:

Originally Posted by toddoky (Post 553818)

What cylinder heads, transmission and transmission crossmember are you using on your set-up?

Older AFR 190's, T56 Magnum, Hurst Drivelines kit crossmember, standard height subframe bushings.

jblaine86

06-02-2014 07:27 PM

I am running a t-56 tremec transmission with there supplied cross member. The engine has pro comp heads that a machine shop worked over to get them up to par.. Thank you all so far for the responses.

All times are GMT -7. The time now is 02:24 PM.