New Bullet Pics
 

Pics of the new bullet going in my rig

http://i1009.photobucket.com/albums/...g71/450ls5.jpg

http://i1009.photobucket.com/albums/...g71/450ls4.jpg

Oil tank to fit between the firewall and inner fender

http://i1009.photobucket.com/albums/...71/oiltank.jpg

Makes me kinda weepy eyed....

Good luck with the install and your relationship with your tire distributor....

This one may actually be easier on the tires since the torque down low is a little less than what I currently have but the top end hp is significantly higher. :confused59:

Which rig is this going into?

Beautiful intake!

My 70 Camaro

Can you give out some of the specs for the new beast?

Hp is well north of 700 hp @ 7,800
It's 450 ci
RHS block 4.165 bore X 4.125 stroke
Ported LS7 heads
Dailey 5 stage dry sump
Cam specs:
Hydraulic Roller
Intake Exhaust

Lift .675 .675

Adv. dur. .302 .324

Dur.@ .50 251 265

Lobe sep. 112

Really nice Tim. That should be entertaining!

I hope it will be, I'm going to experiment with the lsa of the cam in an attempt to bring the peak power down in the rpm range to increase the life of the engine.

Yikes -- that sounds like it's going to be wicked....

- - I have a Nova that you could store the old engine in! ;)