DSE Quadra link install
 

Here's a quick write up that Scott did when he installed a Quadralink on his 69 Camaro.

DSE Quadralink install

https://lateral-g.net/tech_articl...ll/QLassy3.jpg

Great Writeup!

I will throw out a great plug for DSE... They include great installation videos with their products as well. I put an Alumaframe and rear deep tub kit in the current 67 Mustang build and found their videos very helpful!

Very Nice write up! Thanks

I know everyone has their method, but I highly advise against welding on the suspension brackets after the housing ends have already been installed.

At minimal an alignment bar and applicable fixture blocks/pucks should be used while welding the suspension brackets. This will keep movement to a minimum at the housing end.

Ideally, the suspension brackets would be welded on first, then the housing ends for a perfect installation.

Hope this is helpful in addition to the above nice write-up.

Jay

Thanks for the write up