Lateral-g Forums - Chevrolet Zl1/CTSV Brembo Retrofit brake caliper Brackets

Item Location (City/State): Carson City, NV

Price: 175.00

Description:

Chevrolet Zl1/CTSV Brembo Retrofit front brake caliper Brackets $175.00 shipped via USPS priority mail

I engineered these for my car since I am running a 5th GEN IRS retrofitted to fit in the chassis and wanted to be able to run the stock ZL1 brakes all away around. and I figured there may be a few of you out there doing the same thing and figured I would make a few extra sets to sell.

For prototyping I used a RideTech dropped spindle (#11009300) and Wilwood 270-7037 hub, which is pretty standard for a
large number of vehicles. and based on my research should fit the following

67-69 Camaro, 67-74 Nova, 64-72 Chevelle.... and others, for spindle/hub fitment you can check Summit Racing's website http://www.summitracing.com/parts/ar...to?prefilter=1

These parts are Cad Designed and engineered, and waterjet cut from 5/8 6061-T6 aluminum. the design uses all three spindle bolt holes and also keeps dirt out from behind the hub. I have only a few sets, so first come first serve....

I will include mounting bolts for the caliper bracket.

You will need to re-drill the factory ZL1/CTSV rotors to the 5x4.750 bolt pattern.
if you are unable to re-drill them yourself I can re-drill them for you for 50.00 plus freight charges.

http://chevellenv.com/wp-content/upl...5346291843.jpg
http://chevellenv.com/wp-content/upl...5346377899.jpg
http://chevellenv.com/wp-content/upl...5346366503.jpg
http://chevellenv.com/wp-content/upl...5346354140.jpg
http://chevellenv.com/wp-content/upl...5346310651.jpg

And to answer a few private messages I have received so everyone doesn't send me the same questions over and over.....

Q: Do you have a bracket that will fit this other style spindle?
A: No, as I stated in the ad this is for one particular application.

Q: Do you have a rear caliper bracket for a 12 bolt or 9 inch rear end?
A: No, I do not. and currently have no plans to build one at this time since I am running an IRS and this was designed to be ran on a car with the 5th gen IRS.

Q: Can you design me a bracket for such and such setup?
A: Not at this time....