550hp LS2 6.0l Alum Engine W/ LS3 Topend
 

Item Location (City/State):Las Vegas

Price:
$4500
Description:

I am posting this for a friend of mine here in Las Vegas, please contact Jerry with any questions

I have a low mileage LS2 engine with 35k miles in it. The motor is a 6.0L LS2 bottom end( hd crank & connecting rods w/ floating pin pistons) with a LS3 top end (new GMPP cylinder heads and LS3 intake manifold setup).
I was building this motor for my 1969 Camaro, but changed directions and decided to use an LS7 instead. This motor would also be great in a sand rail or hot rod. Estimated crank hp is 550. It is a Gen IV motor with a 58X reluctor wheel.
It does not include a wiring harness, computer, fly wheel / Flex plate starter etc.

- The cylinder heads are brand new #823 castings from GM Performance Parts (part #12629063) and have the hollow sodium filled valves
- Comp Cam for rectangle port cyl heads specs: 229/236 dur 623/617 lift 112LSA
- 12 Point head studs
- GM MLS head gaskets
- PAT #8401 Dual "Gold" Valve springs kit with titanium retainers.
- Comp Cams Trunion upgrade on the Rockers
- .080" Wall 7.4L Chromoly Pushrods
- new GM LS7 Lifters & lifter trays
- Pistons have been fly cut on intake side for the cam
- New take off LS3 intake setup with LS3 42# fuel injectors & fuel rails and beauty cover
- New take off water pump
- Corvette balancer
- ARP harmonic Balancer bolt
- Corvette LS3 oil pan (center sump, shallow pan)
- Taylor spark plug wires
- LS3 coil pacs with harnesses & brackets
- LS2/3 vented pcv valley cover
- LS3 coolant steam port line



Asking $4500

Call / text/ pm Jerry " jovozx12 " (712)253-7583
note that the area code is 712 and not 702. I live in Vegas but still have an Iowa phone number.

Great price on this fellas.

Thanks Scott!

You are correct, this is a great price, more power, better parts and cheaper than a LS3 crate engine!

I am running a similar engine (larger cam & TB) in my 68' Camaro and just built the same spec engine for Curtis' (SpiffaV8) 67' Camaro build
Great power and still maintain drivability

Pm sent

pm replied

Great price, hopefully we will get it picked up Saturday for Project CashChunky.

Ls2
 

Thanks Jeff for posting this for me! I have been really busy. I was planning on putting this motor in my 69 Camaro but came across a decent deal on an LS7 so I have changed directions a little. If anybody has any questions about the motor you can PM me or call/text.

Sold!