Heater hose reducer
 

Anyone know where I can purchase a metal heater hose reducer. 3/4 to 5/8. Found a plastic one, but a little nervous about "plastic" reliability.

fitting
 

Try this place

https://www.plumbingsupply.com/barb.html

Instead buy a heater hose that is 5/8 with a 3/4 bell on one end

Napa 10084

Thanks guys.... I'll check it out. Now if I could just find a heater hose with a molded 45 degree bend on one end....

Try taking a look at the various hoses at the parts store. If you can't find that, try a Gates unicoil hose shaping coil. I used a unicoil on a previous project and it worked great.

I can get them from Oreillys

Thanks for this tip! I got that hose and it worked awesome.

Andrew

I've had good luck with Jags That Run:

http://jagsthatrun.com/Pages/Parts_C...-splicers.html

They have all kinds of unique stuff.

I can second that. I use their radiator hose reducers/splicers when making custom hoses.

Andrew

Just to adding info as this is the one I bought instead of the Napa one

ACDelco# 18010L
GM# 88907450