![]() |
502 RJ Engine Harness
Is there a trick to plugging in the injector connectors from the engine harness (initial install)? I thought I had it figured out...I spun the injector bodies around so that the plugs pointed up, but am not able to reinstall the injector retaining clips with the injectors in that position. Do they go in from the bottom? What a PITA! :eek: Thanks for any help.
Tom |
I had the same question initially but spinning the injectors around so that the connector pointed up made it easy to plug them all in.
|
Tom, So did you leave the retainer clips off? That's what I ended up doing...will have to see if they leave once I run it.
|
All times are GMT -5. The time now is 09:48 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net