SPI Viper Red 1965 Mustang painted 9 years ago
 

We are going to be changing the front nose and getting rid of the large spoiler

http://img.photobucket.com/albums/v3...ps9mwyf8uh.jpg

http://img.photobucket.com/albums/v3...psmsklrll8.jpg

We will also modify the rear bumper to get a better fit and paint body color.

http://img.photobucket.com/albums/v3...psbuj04fhs.jpg

It still looks great.

This is the first test fit of the customer supplied Stangaholics front apron. I had to do a lot of fiberglass grinding to clear the electric fan. It still needs to go down on the right side and up on the drivers side.

http://img.photobucket.com/albums/v3...ps9dndivx1.jpg

http://img.photobucket.com/albums/v3...psf5evz1nb.jpg

To get the front end to line up better Brian had to adjust the fenders.

http://img.photobucket.com/albums/v3...psvmxmzkjm.jpg

http://img.photobucket.com/albums/v3...ps6ghoottn.jpg

http://img.photobucket.com/albums/v3...psvj8japo3.jpg

http://img.photobucket.com/albums/v3...psbxlna3ux.jpg

I had to add a little filler to match the fenders

http://img.photobucket.com/albums/v3...pszigbqbmp.jpg

Epoxy primed

http://img.photobucket.com/albums/v3...pswbszwjiz.jpg

Brian cut the ends off the bumper and lined up the center

http://img.photobucket.com/albums/v3...pspdbbxaac.jpg

Since the bumper was narrow we had an old bumper that he cut out a section and welded to the back

http://img.photobucket.com/albums/v3...psxjhb0eya.jpg

Reshaping the end

http://img.photobucket.com/albums/v3...psaoahl39g.jpg

Now he can screw it together to test fit

http://img.photobucket.com/albums/v3...psymq6et4p.jpg

After a lot of welding and grinding

http://img.photobucket.com/albums/v3...psl28qywld.jpg

http://img.photobucket.com/albums/v3...psxox8ydww.jpg

Epoxy primed. Next week I will do a little bodywork

http://img.photobucket.com/albums/v3...ps1zw6txx9.jpg

Test fitting the bumper after a little bodywork

http://img.photobucket.com/albums/v3...psntdnuntn.jpg

Epoxy primed

http://img.photobucket.com/albums/v3...psrvwfvalv.jpg

The bumper came out looking flawless! What else do you have planned besides the front end changes?

That's all we are doing and it goes back to the owner.

I added a couple of L brackets that will bolt to the radiator support

http://img.photobucket.com/albums/v3...psgy5wsuju.jpg

SPI white epoxy

http://img.photobucket.com/albums/v3...psy8xgfvps.jpg

http://img.photobucket.com/albums/v3...psnusuot6g.jpg

I wet sanded lightly with 600 and sprayed 3 coats of SPI Viper Red yesterday and today sprayed SPI Universal clear

http://img.photobucket.com/albums/v3...ps20yivuxs.jpg

http://img.photobucket.com/albums/v3...psdrhpooqa.jpg

I like the changes. Makes for a more complete and smooth appearance.