those with DSE subframe... please come in
 

Ok I bought one and installed it in my 69 Bird and started looking at my AC mounting...
I had the Fbody bracket on it before now dont think that will work :bang:
what have Y'all done to mount your AC comp?

Kwik Performance and Holley both have passenger side high mount AC brackets for Sanden compressors that work with F body accessories.

Don

I have the Holley cast aluminum mount on my 69 Firebird and am impressed and pleased with it. I have Vintage Air Sure Fit kit and the Holley mount worked very well. The paperwork reccomended a certain length belt but I found that a belt 3/4" shorter fit better. My engine is a 2004 GTO LS1 with original pulleys.

Tim john---

thanks Don and Tim
I was looking at work today and found the dreaded answer Fbody comp mount will not work, I did see Holley and Kwik and dirty dingo I kind of like the Holley stuff so far - any pics of that bracket and comp installed?
BTW on a weird side not LAT-G is blocked at work and the other PT board isnt but I really dont like the setup they have for threads


Out with the old
http://i156.photobucket.com/albums/t...170121_004.jpg
And In with the New!
http://i156.photobucket.com/albums/t...170121_002.jpg
http://i156.photobucket.com/albums/t...170121_012.jpg
http://i156.photobucket.com/albums/t...170121_014.jpg

Down low...
 

I'm not sure that it will work with your setup but it fits much tighter than the factory mount.
I used the Allen Grove low mount for my Camaro. I am using the TCI subframe, I am very happy with results. Nice and tight.
http://www.alangrovecomponents.com/LS.htm

:flag2:

Thanks Sleepertime and I like the design but when I looked at a TCI frame compared to the DSE I dont see anyway a low mount will work, please anyone else been here done this?

Kwik makes a low mount bracket for the small Sanden compressor but it is for LSA/Corvette accessories. For F body accessories your only option is the Alan Grove bracket but it won't fit the DSE sub. The Art Morrison sub is the only one I am aware of that will accommodate the stock F body compressor or the Alan Grove F body mount.

Rich, I put the Holley bracket in my wife's 69 vert if you want to take a look at one installed. It is the Corvette spacing version.

Don

I noticed you are in dallas. Im in allen so if you want to swing by and look at mine you can. DSE everything with a ls. Text me 972-814-8824