Lateral-g Forums

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Chassis and Suspension (https://www.lateral-g.net/forums/forumdisplay.php?f=38)
-   -   SC&C A-Body Control Arms???? (https://www.lateral-g.net/forums/showthread.php?t=5492)

ZZ3ElCamino 08-03-2006 04:14 PM

SC&C A-Body Control Arms????
 
Are there any A-bodies ('67 preferably) using SC&C control arms with the ATS spindles? If there is, can you give me your thoughts about their setup? Thanks!

Derek69SS 08-03-2006 04:32 PM

I have their Stage II package, which includes the SPC adjustable arms, and Howe Tall-Balljoints.

Great quality, and design :thumbsup: The only downside is there is no bumpstop (not really needed in droop anyway) and you may have to grind a notch in your UCA mount on the frame.

Overall, I'm very satisfied, and SC&C was a great company to deal with. :yes:

ZZ3ElCamino 08-03-2006 04:37 PM

From the looks of the control upper control arms, it doesn't appear that the QA-1 coil over setup can be used. Am I right with this assumption?

Derek69SS 08-03-2006 04:50 PM

Upper arms won't have any effect on the use of coil-overs.

Keith Anderson's bad-ass '70 el camino has QA1 coil-overs and SPC adjustable arms. :cool:

ZZ3ElCamino 08-03-2006 08:16 PM

Oh yeah, sorry I wasn't thinking. For a second I was thinking that the coil over shaft bolts into the upper control arm, but in reality it bolts into the spring pocket on the frame. My bad..... :_paranoid

Marcus SC&C 08-10-2006 12:47 PM

Just a quick note. We offer the AFX tall spindles and our adj. upper arms as a package, StreetComp-AFX. They`re a great combination. Also one `64-`67 A body there`s usually no trimming required at all. Mark SC&C

Teetoe_Jones 08-10-2006 02:15 PM

We have a 67 Chevelle in our shop getting the SC&C arms with Tall AFX spindles.

It works great.

Tyler

ZZ3ElCamino 08-10-2006 02:44 PM

Tyler, would you be able to send pics of the install ([email protected])? I would like to avoid trimming anything if possible. Thanks

Teetoe_Jones 08-10-2006 03:56 PM

We will posting them on our site after we are done.

It will be in the project section.

Tyler

ZZ3ElCamino 08-10-2006 05:11 PM

Awesome, I will be waiting for it! Thanks


All times are GMT -5. The time now is 04:46 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net