Lateral-g Forums

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   LSX Conversions (https://www.lateral-g.net/forums/forumdisplay.php?f=70)
-   -   Ls conversion parts recommendation (https://www.lateral-g.net/forums/showthread.php?t=55142)

69greyghost 07-01-2017 08:09 AM

Ls conversion parts recommendation
 
Guys, I have a new Project. I have acquired a 67 convertible camaro. The car has no motor or trans and needs some work, however I am gonna ls it and was seeking some feedback on possible components I should use that are not going to break the bank. I want to get some long tube headers, a gas tank, a radiator, and a possible oil pan for an ls conversion. I would like them to be under 400 dollars each item. Thanks in advance guys.

im4u2nvss 07-01-2017 11:13 AM

https://www.holley.com/products/ls_p...ap_components/

These parts work well with a stock subframe. Not sure about your $400 each item.

Tim john--- 07-01-2017 02:44 PM

I too went with the Holley LS conversion kit, engine mounts, stainless mid length headers, transmission mount, it all bolted in perfectly. I sent my original wire harness to Speartech for stand alone operation and computer re-flash, Rick's stainless fuel tank. I have a MAST oil pan which also fit perfectly. The only item under $ 400.00 was the oil pan. Application is a 69 Firebird convertible with a modern GTO engine and Tremec TKO-600 five speed.

Tim john---

colorado80439 07-12-2017 01:09 PM

Or you could just do this!
https://denver.craigslist.org/cto/6206504852.html

Schwartz Perf 07-12-2017 01:40 PM

Quote:

Originally Posted by 69greyghost (Post 661533)
Guys, I have a new Project. I have acquired a 67 convertible camaro. The car has no motor or trans and needs some work, however I am gonna ls it and was seeking some feedback on possible components I should use that are not going to break the bank. I want to get some long tube headers, a gas tank, a radiator, and a possible oil pan for an ls conversion. I would like them to be under 400 dollars each item. Thanks in advance guys.

Long tube headers, radiator & fans, and an EFI tank for under $400?

I think you need to buy used parts.

But actually I have a set of Holley/Hooker LS swap headers that i'd sell you for $400, they were used for mockup.

-Dale

markos920 07-19-2017 06:06 PM

Quote:

Originally Posted by Schwartz Perf (Post 662112)
Long tube headers, radiator & fans, and an EFI tank for under $400?

I think you need to buy used parts.

But actually I have a set of Holley/Hooker LS swap headers that i'd sell you for $400, they were used for mockup.

-Dale

Is this short or longtube? Also, will it fit 72 nova with all Holley swap parts?
Thanks

69greyghost 07-19-2017 11:15 PM

Quote:

Originally Posted by Schwartz Perf (Post 662112)
Long tube headers, radiator & fans, and an EFI tank for under $400?

I think you need to buy used parts.

But actually I have a set of Holley/Hooker LS swap headers that i'd sell you for $400, they were used for mockup.

-Dale



Long tube headers were not a requirement. Just headers in general, I got the spectra tank for under 300 bucks, and a radiator from superior radiator in Michigan. I used their radiator in my previous swap and it worked flawlessly. I paid 400 on the dot for my radiator that includes shipping. These parts are proven to me. All I need is the oil pan and I may look into the holly one. Used parts would be ok but I got some decent ones without going used. And for headers I went with the e bay shorties. This isn't a performance build it's a cruiser. I think I will be fine with the parts I selected.


All times are GMT -7. The time now is 01:00 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net