2004r
 

Hello,

I have installed a 2004R in my 72 Skylark, the gearbox comes from Extreme Automatics and the TV cable is an EZ TV Cable from Bowtie Overdrives.

As explained in both instructions, I replaced the TV spring from the gearbox with the one included in the Bowtie kit.

Everything is in place but I 'm afraid to go further and damage the gearbox....

I don't know how to tune the idle TV position...(ExtremeAutomatics gives an ideal length of 0.840 but with their own spring, not the one from Bowtie ).
I don't know either why it's needed to replace the TV springs...I don't understand why you must replace the TV sping when you change the TV Cable !?


I have another issue with the oil lines going from the gearbox to the radiator, I read that the 2004R has inverted ports compared to the TH350, does it is critical to use the same position as the TH 350 or must I invert the position ?


Thanks for your help

regards

David