|
LS3 Crate harness question
1 Attachment(s)
I have a dumb question but her it goes where does the “Bulkhead” connector plug into?
|
Nuthin'
Nothing unless you want to use it for instrumentation outputs. In the instructions there is a table of the outputs available to use.
|
Thank Oleyeller :)
|
Jeff, do you have the instructions? If not I can email you the PDF.
|
Bulkhead connector also connects to the auto transmission controller if you have one.
Don |
I pulled ignition and speedometer off of it.
|
1 Attachment(s)
Pinout & part numbers in attached PDF.
|
Thanks everyone for your help !
|
2 Attachment(s)
For those that have used the bulkhead what’s the best way to pin it and what type pin does it use male or female etc.. ?
Not sure how the purple connector comes apart... figured I would ask before I break it ...lol. |
|
| All times are GMT -5. The time now is 03:39 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net