Need help!!!
 

What Torque Should I Use To Tighten My New Fidanza Alu-flywheel To The Crankshaft? And What Torque Should I Tighten The Centerforce Dual Friction Clutch To The Flywheel? It`s A 396 Bigblock...
Thanks In Advance....
Mikael

Can´t anyone help me with this?
Someone has to know....let me know asap!!!!!!!!

Fidanza site "Follow the OEM specifications for the torque and replacement of the flywheel to crank bolts and clutch mounting bolts."

I would put the flywheel bolts in with some blue locktite at about 80ilbs, the pressure plate bolts should be about 10ilbs or less with some blue locktite also, in a star pattern. These are just numbers off of the top of my head so feel free to correct me or double check.

Flywheel should be about 65 ft. lbs. and pressure plate should be about 35 ft. lbs. if they recommend stock specs.


Jody

If you're using new ARP bolts (I'd recommend doing so) ARP will specify a torque value, depending on whether you use oil or ARP lube on the threads.

Just found the specs on the net. Flywheel 65ft.lb and pressure plate 35ft.lb
so you where right, Jody :thumbsup: :thumbsup:
Thanks
Mikael

That's amazing! :faint: What do I win???!!! :rofl:

Jody

a fruit cake!

35ilbs sounds like a lot for the pressure plate, be carefull not to warp it

Are you talking Inch Pounds or Foot pounds? i notice a difference in your guys wording. 35 FT lbs, sounds about right for a pressure plate.