Lateral-g Forums

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Open Discussion (https://www.lateral-g.net/forums/forumdisplay.php?f=14)
-   -   LT4 MAF wiring (https://www.lateral-g.net/forums/showthread.php?t=59914)

vet57air 08-12-2023 05:00 PM
LT4 MAF wiring
 
Had idler pulley seize on my 2019 LT4 which took out the the two drive belts which pulled the wiring out of the Mass air flow plug. What are my options? Looking at the plug it is not obvious how to reterminate the wires. I see extender harnesses which I could splice in but not ideal.

camcojb 08-12-2023 11:37 PM
1 Attachment(s)
Not sure exactly what you're asking. Looks like they use a metripack connector, probably 150 series. The wire order I find is like the pic below.

vet57air 08-13-2023 10:06 AM
1 Attachment(s)
Quote:
Originally Posted by camcojb (Post 723787)
Not sure exactly what you're asking. Looks like they use a metripack connector, probably 150 series. The wire order I find is like the pic below.
Thx, but mine has 7 wires. Connector with a red locking tab. I know the coloured wire positions. Have figured out how to pull off the connector retainer but not how to get the individual wire pins out.Attachment 80495

camcojb 08-13-2023 10:28 AM
https://static.speedwaymotors.com/pdf/425571101.pdf

vet57air 08-13-2023 11:58 AM
Quote:
Originally Posted by camcojb (Post 723790)
Thx for that. Had not thought it was anything but a crimp connector.

andrewb70 09-27-2023 06:47 AM
Quote:
Originally Posted by vet57air (Post 723789)
Thx, but mine has 7 wires. Connector with a red locking tab. I know the coloured wire positions. Have figured out how to pull off the connector retainer but not how to get the individual wire pins out.Attachment 80495
That is a Molex connector, not Metripack...

https://www.bmotorsports.com/shop/pr...oducts_id/3427

Andrew


All times are GMT -5. The time now is 08:30 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net