I've been getting alot of questions about my G-Link install so I snapped some pics and wanted to clarify what I think we did.
The shop did NOT modify the shock cross member bar or trunk floor. They only installed a shorter spring. I "think" they went from 12" standard springs to a 10" spring so I measured and took pics. Looks like the spring is around 8" compressed. So any who can tell by this let me know. I know the shock travel is decreased but ride height was very important to me. The car does not bottom out.
Also, the pics also show custom tailpipe routing around the G-link and stock width Ricks tank that is not dog eared.
Hope this helps:
