Quote:
Originally Posted by Apogee
We have kits for the Moser/Strange/etc GM/Ford housing ends with the GM pattern and 80mm Ford bearings, however not the bolt-on C-clip eliminator kits since they tend to need to be mounted in the same position as our brake components.
Just a thought, but if selling the bolt-on C-clip eliminators and axles is an option, having new housing ends welded onto your housing along with new axles would open up a whole range of brake kits for you. We typically suggest the new-style Ford 9" housing ends as a good standard, however can accommodate other positively retained applications as well.
Tobin
KORE3
|
That is exactly what i am starting to think i'll need to do.. Say the wilwood kits that are out there, that would go directly on, they are not your typical pro touring parts, more pro street stuff,, 1/4..
Nils