12Bolt Housing Ends, with C Clip eliminator. What brakes??

[Apogee]

Originally Posted by deuce_454

i had 9 inch ford housing ends installed... im prety sure core3 has brakes galore for GM ends.. as does baer

We have kits for the Moser/Strange/etc GM/Ford housing ends with the GM pattern and 80mm Ford bearings, however not the bolt-on C-clip eliminator kits since they tend to need to be mounted in the same position as our brake components.

Just a thought, but if selling the bolt-on C-clip eliminators and axles is an option, having new housing ends welded onto your housing along with new axles would open up a whole range of brake kits for you. We typically suggest the new-style Ford 9" housing ends as a good standard, however can accommodate other positively retained applications as well.

Tobin
KORE3