Quote:
Originally Posted by BRIAN
Non OEM panels? If so they simply do not fit without reworking. Camaro's also had bad fender to door gaps from factory.
Get car on suspension. Then pull nose loose. Adjust doors to 1/4's first. Hinge bolts on body adjust front to rear and up and down. Use a paint stick as a guide. Then adjust in and out with door side bolt. Pull fenders back into place.
If they are not factory there is no way you aren't going to need some adjustment at the fender to door fronts. Also remember "EVERY" bolt has to be tight not finger tight. Every piece on that nose will effect fitment.
I would do some basic measurements before I took a ram to that door jamb. I have a 69 and can get you a rough measurement if needed. Put the ram down and try some adjustments first. Subframe squared and tightened down?
|
Yes .....I definetly do not want to use the ram ....