Quote:
|
Originally Posted by bob johnson
I'll try to get Alan over here and follow this thread. He's got tons of pictures..We want the April issue of PHR to get out before we post much. They have about 16 pages of info on the Cuda in April's issue..it should be out in about 2 weeks. We just got in the new Centerforce dual disc clutch with an Aluminum Flywheel and pressure plate..Supertrick..we were going to run a single disc 11 inch clutch but the starter ring on the flywheel wouldn't clear the inside of the rear drive dragster can we are using..10.5' single wouldn't hold the power..We also got in the Rockland gear prepared T56 6 speed trans and the Transaxle rear that they prepared. Should hold over 1,000 h.p. Going to be interesting to see how much power and torque the motor makes with fuel injection vs what it made with the demon carb and Indy Cylinder intake. We are going to put a 3 or 4 stage nitrous set up on it too..We're getting it set up for Maxton on April 1..I think Troy and Poteet are going to have their Cuda up there too..1200+H.P. 4 cylinder turbo charged Hemi..very trick
|
No problem, I can certainly wait. That's an incredible car that you guys put together. It was easily THE car of SEMA.
Definitely keep us posted on the motor. That sounds awesome.
