[Tuske427]

Thank you, everyone! It means a lot to receive the kind words.

I spent some time yesterday finishing up the fuel tank access panel. I purchased a hinge from Lowes and modified it. I welded the hinge to the door but not to the trunk. I used some buttonhead allen screws and welded some nuts on the underside and used one larger one for securing it shut. I plan on using some type of weatherstripping to help seal it and prevent any vibrations or exhaust leaks. I also trimmed the allen bolts to length. they are untrimmed in the pics.

The metalwork is for the most part there, but it will need some bondo/ prep work to get it to a "show" status..