The driveshaft is easy for the Getrag Matt.. I will be get one built here pretty soon & show you what it will be looking like.. Basically what we are doing is trying to build as much of the car around drivetrain & suspension..
Here is a supercharged 5.4 we have been messing around with this week.. Thanks for the info Matt!
Quote:
Originally Posted by 69MSA
Right know I don't know if I'm going to keep the TR6060. I have a T56 that needs to be rebuilt lying around as well. with the TR6060, or Getrag, I think I would need a different output shaft to fit a traditional slip yoke. Additionally, the shifter is pretty far back and if I set the engine back I'd probably have to drive from the back seat.
Hell, right now my Mustang is on the back burner because there is no way I could fit the 5.4 supercharged DOHC engine with both conventional power steering and A/C on the accessory drive. The increased deck height, plus supercharger makes everything just a little too much bigger than the 5.0s, which are a tight fit. Given that the engine was my starting point, (and cost more than the car) I decided to just build another car around the engine.
Anyway, this thread is about your/your customer's car so I won't digress beyond tech talk of what might/might not work.
Matt
|
It is fighting me Tony...
Quote:
Originally Posted by tones2SS
Very nice Cris. That engine does look huge. Those headers are pretty sweet looking. Good luck with the passenger's side!
|