Quote:
Originally Posted by dead sailor
Thank you for posting those links. I would like to run the 7/8" wilwood master instead of the master that comes with those kits. I believe all of those are 1" or bigger. I'm going to call a few of these places tomorrow and see if they will sell just the adapter.
|
The master cylinders shown in those links with the aluminum body and black plastic reservoirs are actually OE Mopar units and can be found in a variety of configurations and bore sizes including 7/8", 15/16" [24mm], 1.06", etc. They were supplied on numerous Dodge/Plymouth/Chrysler applications from the early 80's through the 90's IIRC.