Two manual brake conversion questions???

[Apogee]

Originally Posted by dead sailor

Thank you for posting those links. I would like to run the 7/8" wilwood master instead of the master that comes with those kits. I believe all of those are 1" or bigger. I'm going to call a few of these places tomorrow and see if they will sell just the adapter.

The master cylinders shown in those links with the aluminum body and black plastic reservoirs are actually OE Mopar units and can be found in a variety of configurations and bore sizes including 7/8", 15/16" [24mm], 1.06", etc. They were supplied on numerous Dodge/Plymouth/Chrysler applications from the early 80's through the 90's IIRC.