Allen, I'll definitely do that.
I got an e-mail from a member noting the axles in the housing. I guess I should have pointed out that I did the QL installation on a bare housing and that the axles and rotors were installed after I was done... just for taking a few pics... it gave it a more complete look.
William, here's a pic of the way I mounted the housing. I welded the standoffs with the angle iron to my table, then set the housing on the angle iron, set the -2 degree pinion angle and tacked it. It was solid and worked great. I know it's not the fanciest jig out there but it was a good solution for doing it yourself in your 2 car garage.