Update time. Spent half of Thursday and the majority of Friday working on the car.
Started by laying out the bulk of the parts left to install and typed up a list of “needed to run” items to prioritize my work.
I spent most of my time laying out the fuel system. Got the front/return lines ran to the regulator. The return line will also flow thru a cooler I mounted in front of the radiator.
For the feed side I struggled with what to do with the y-block. I ended up making a little bracket that re-uses one of the holes from the previous coil installation. I may move it lower so the lines hug the top of the valve cover. I need to figure out where to mount the MSD box and coil so I can finish routing the feed line.
After the fuel lines are done I will focus on the electrical system again. Need to get power to the Holley ECM, fuel pump relay, & Vintage Air unit. Then it’s on to a few exhaust updates before changing fluids and pre-fire inspection.