Quote:
Originally Posted by MaxHarvard
with the vaporworx system you need to replace the regulator with a 4th gen one AND use the adapter at the same time.
You also really need to pinch the crap out of that retainer clip so it doesn't slip off. I had the exact same issue as RocketRod did.
|
My assumption is the regulator is the 4th gen since the adapter was in place. I bought the whole tank setup through MCB. Sorry for leaving some of the info out. That clip you're referring to was a pain when I reinstalled the regulator though. Hector from Rick's also told me to take a look at the harness to the pump as he did have one customer with a defective harness.