I am fairly certain that it is blue to spin the right way, but you can always de-pin the connector and swap em if its wrong. Use some test leads to a battery and check.
No problem helping, we are an AAW dealer and use this kit alot, along with the Dakota Digital so it was on the tip of my tonque.
Just ask if you are needing any help. Oh an make sure you don't mount the fan module under the hood, it can be ruined with moisture. Glove box side under the dash above the kick panel has lots of extra room for it, but you have to run the wires across. I just know the driver side is a bit tight above the kick panel. Good luck!
|