Dakota Digital Cooling Fan Controller Help

[64pontiac]

I am fairly certain that it is blue to spin the right way, but you can always de-pin the connector and swap em if its wrong. Use some test leads to a battery and check.

No problem helping, we are an AAW dealer and use this kit alot, along with the Dakota Digital so it was on the tip of my tonque.

Just ask if you are needing any help. Oh an make sure you don't mount the fan module under the hood, it can be ruined with moisture. Glove box side under the dash above the kick panel has lots of extra room for it, but you have to run the wires across. I just know the driver side is a bit tight above the kick panel. Good luck!

[468Camaro]

Great info.and dont assume the fan is spinnin,the right way by puttin your hand at the frontof the fan..put a piece of paper in front and make sure the papee gets sucked up against the radiator...first ride with a Goodwrench Crate not cooling taught me that one...

[468Camaro]

Great info.and dont assume the fan is spinnin,the right way by puttin your hand at the frontof the radiator...put a piece of paper in front and make sure the paper gets sucked up against the radiator...first ride with a Goodwrench Crate not cooling taught me that one...