Quote:
Originally Posted by garyb
Maybe a dumb question, but on your picture that shows the 'new' quarter screwed in place for tack/welding, I noticed the screws are on what's left of the existing quarter. Are the two overlapped as in lap welded? I've always wondered. I know when I did my trunk pan, I overlapped, used metal screws to hold in place and used an air body saw to cut through the old and tack as I went along.
|
The two were overlapped, but I cut the overlapped pieces and butt welded them together as I went along. I used a black marker to draw up the cut lines. You can see it in the picture. Afterwards I went back and welded up the screw holes.
Tu