Quote:
Originally Posted by FETorino
Now that is some nicely thought out, functional, fab work you got there Sieg. I'm dam impressed and will be copying you.  |
Thanks and No problemo!
The pedal surface is .125" 6061 AL. The mount is 1 x 1.5 x .140" tubing. Mounting screws are 8 x 32 x 3/8". Pedal plate dimensions are 5.75" tall, 3" wide at bottom, 2" at top, extension is 2 7/8" tall. The angle is 10*. I used a linchpin for the pivot and safety wired it, there's a better solution but for $0.89 it works.
Since I've heard no mention of this as an issue I was wondering if I was the only one fighting the stock pedal configuration.
