Norwood

[Sieg]

Originally Posted by FETorino

Now that is some nicely thought out, functional, fab work you got there Sieg. I'm dam impressed and will be copying you.

Thanks and No problemo!

The pedal surface is .125" 6061 AL. The mount is 1 x 1.5 x .140" tubing. Mounting screws are 8 x 32 x 3/8". Pedal plate dimensions are 5.75" tall, 3" wide at bottom, 2" at top, extension is 2 7/8" tall. The angle is 10*. I used a linchpin for the pivot and safety wired it, there's a better solution but for $0.89 it works.



Since I've heard no mention of this as an issue I was wondering if I was the only one fighting the stock pedal configuration.