Quote:
Originally Posted by makoshark
What length coil-over was used on the front of the Ridetech built Goodguys 69 Camaro?
Hopefully Bret will chime in and answer this for me. I've contacted the company and was given the run around about the correct answer to this question
|
The reason the answer to this has been elusive is because I have not yet decided what the final configuration will be.
To circumvent that situation it might be better for you to tell us what length you need for your car based on the ride height you want and the distance between the shock mounts at that ride height. Then you won't have to rely on any variations in someone elses configuration or information.
The process is easy:
1. remove the shock or spring
2. with a floor jack set the car at your intended ride height
3. measure the distance between the shock mounts
We will have a shock that is really close to what you need. If we know what drivetrain we can also calculate and approximate spring rate at that height.
Hope this helps!