Quote:
Originally Posted by Sonar Chief
Are you gonna change out the gears? I figure I'll see how these go for a starter ... there is always something to change in the future, that's hot rodding!!
|
If my wishes were fishes and my net was full there would be 3.73, 33 spline axles & true trac, with upgraded bearing ends... In all reality your Rear brakes are my pinnacle. I have 6p up front.
But yeah, I will likely run the 3.55 posi and probably transfer my drums off the 10 bolt until I nab some rear disc brakes with a parking brake... Which may be sooner than later with any luck at all.
Sweet score on the c5 parts, consider brown scotchbrites for heavy deposits, maroon is the first I would try, grey is a waste of time in my opinion. I got some dark grey from the local weld supply but they are messy and coarse as heck.
Wear some gloves or you will have 80 grit finger tips by the time you are done.