I took the kids north for Skiing and came back to a bunch of pictures - some you may have already peeked at on Facebook
.
As y'all know, Scott narrowed the DSE stuff I sent him, 2". He also cut the upper factory control arm 2". I plan to make a tubular arm when it comes back, already have a set of factory upper arms here to build a jig from. No sense to me having DSE tubular stuff and a cut and welded factory upper.
He's working with DSE on a sway bar now, if not a splined one will probably work with the sway bar links I bought from DSE - would probably give me more adjust-ability too. He's also working with Ride Tech to get the right shock, since the narrowed arms will need a shorter stroke.
It's now 62" WMS to WMS. Scott reports that a 12'' wheel with 8'' back spacing will fit well. I will roll the lips on the quarters that were installed. May also go with flares and wider stance... still have that bug in my head.
I now have to figure out what mods to do to the rear 2012 Camaro SS rotors I have. Also need to order axle shafts for the ZO6 splines.
I am really looking forward to getting this back to wrap up the final details and get my enclosed trailer back.