Quote:
Originally Posted by will69camaro
Sound coming from all 4? Sounds only when brake pushed? Did you shim the brackets?
Did not shim the brackets at all, the sound is when you apply the brakes...
Different pads make different sounds depending how aggressive they are, but I don't see them making excessively more noise prior to bedding them in.
|
Did not shim the brackets at all , just the calipers to center them on the rotor
Quote:
Originally Posted by GregWeld
NO they should not sound like that! EVER....
Get it up in the air so you can see the back side of the rotors - my guess is you have a bolt in a caliper that is up against the rotor! You should see it quickly because it's probably already left a witness mark.
|
I will check the back side of the rotors, but I did make sure that the caliper bolts were not digging into the rotor when I assembled them. The noise comes on when you apply the brakes. Not sure what to make of the noise...