View Single Post
  #2  
Old 10-13-2015, 12:02 PM
Vince@Meanstreets's Avatar
Vince@Meanstreets Vince@Meanstreets is offline
Senior Member
 
Join Date: Nov 2004
Location: Bay Area, California
Posts: 5,532
Thanks: 13
Thanked 20 Times in 13 Posts
Default

If you nail the back space it can be done. You may get some rubbing on the inner tub while going into a drive way.
Set to clear 5/8" from the outer quarter lip. There is a raised portion just above the lip that you have to clear but since its a large diameter wheel with a low profile aspect tire you should be fine. I have been closer than that (1/2") with no issues.
The only other part you will have to watch is the lower shock mount and bracket.
__________________
MEANSTREETS PERFORMANCE

Dealer for
ACCUAIR rideheight control systems
ENTROPY RADIATORS XXX radiators for your pro-touring vehicle
FORGELINE MOTORSPORTS Highline custom 3 piece wheels
WEGNER AUTOMOTIVE Custom engines and LSX drive systems
SPEEDTECH PERFORMANCE Bay Area stocking dealer

NEVER FORGET -11
Reply With Quote