...

Go Back   Lateral-g Forums > Technical Discussions > Wheels and Tires
User Name
Password



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #2  
Old 10-13-2015, 02:02 PM
Vince@Meanstreets's Avatar
Vince@Meanstreets Vince@Meanstreets is offline
Senior Member
 
Join Date: Nov 2004
Location: Bay Area, California
Posts: 5,532
Thanks: 13
Thanked 18 Times in 12 Posts
Default

If you nail the back space it can be done. You may get some rubbing on the inner tub while going into a drive way.
Set to clear 5/8" from the outer quarter lip. There is a raised portion just above the lip that you have to clear but since its a large diameter wheel with a low profile aspect tire you should be fine. I have been closer than that (1/2") with no issues.
The only other part you will have to watch is the lower shock mount and bracket.
__________________
MEANSTREETS PERFORMANCE

Dealer for
ACCUAIR rideheight control systems
ENTROPY RADIATORS XXX radiators for your pro-touring vehicle
FORGELINE MOTORSPORTS Highline custom 3 piece wheels
WEGNER AUTOMOTIVE Custom engines and LSX drive systems
SPEEDTECH PERFORMANCE Bay Area stocking dealer

NEVER FORGET -11
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:07 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net