Quote:
Originally Posted by classiccamaro
Hi Zak....Once again, car is stunning!! On your front end set-up, what control arms, shocks, spindles did you use. I'm in the planning process on my 70 build...already have the 12 bolt and quadra-link set up. While my car will most likely see a little auto cross....it will be mostly a street car with a bunch of LS HP (LSA). For the driving you have done...how do you feel the front end components you chose are working out?? The stance on your car is killer!! I am leaning towards the DSE front sub, but that comes at a cost..... However, the numbers (cost) for control arms, shocks, spindles, steering box, sway bar seem to approach the cost for an aftermarket.....
Thanks, Dave
|
I have the global west upper and lower control arms and did the custom works performance coil over conversion that is a bracket welded in the pocket not just the coil spring coil over. I went with the cpp c5 spindle so the z06 brakes bolted right up. So far all i have done is just drive it around town and threw it through some corners and it handles and feels real good but its hard for me to say since i haven't driven a car with one of the aftermarket sub frames. The only reason I went with the global west control arms was a buddy went to wide of wheel and had to get some arms that were narrower so i got them at a really good price but they are a really nice piece.