Evening Neil,
What a great looking project and thank you for sharing the build up.
Also this post has finally confirmed it that is exactly the steering wheel I am looking for. I guess I will give old Tommy Boy a call in the morning and tell him to order one up for me.
Quote:
Originally Posted by Neil B
Here is the mock up of the driver's seat and steering wheel. I chose a Momo Prototipo wheel and mated it to an NRG short hub and quick release. The quick release was a must-have with the Kirkey race seats and side pipes. I will be using the stock Tilt/Tele column. The tilt mechanism had some play in it so I pulled it out and replaced the lower knuckle/lock shoe pins, column sphere, and upper/lower bearings. I'm retaining the turn signal switch but the ignition and starter switches will be relocated to the dash.
 |