Quote:
Originally Posted by WSSix
To remove the intake tubes from an TPI engine, I suggest either getting sockets with long torx bits, or switching to allen head bolts and getting sockets with long allen keys. Also, a swivel extension even if just a short one. This will really help you get into the area the bolts are located at and be able to confidently remove and torque them.
Also, just as a general rule, if you're ever having to buy allen keys, always try to find the ball end ones.
Keep up the good work.
|
Quote:
Originally Posted by gofastwclass
I second the ball end Allen keys. There is nothing worse than trying to work with an Allen fastener using a standard Allen tool and not being able to get at it straight on. I would also make sure to buy some from a quality vendor. I have a friend who uses the stuff sold at your local nautical themed "tool" store and 90% of it is... junk to be polite. However I will buy blue rubber gloves from them.
You're moving in the right direction.  |
Thanks for the tips guys! I'm actually searching online for some long Torx and Allen extensions right now after stripping another Torx head this afternoon. The extra long extensions seem like the way to go... there's always the right tool for the job!
Quote:
Originally Posted by shelteredV
Great effort, another home build coming out nice!
|
Thanks! I'm getting there slowly but surely.