Quote:
Originally Posted by jeff71
Mark, did you go with the close ratio and have D&D do the .50 swap on this build?
|
D&D can give you the tight ratio 1-5 and add a 0.5 6th. This works great with a blower motor with a ton of torque because it can pull the 3.25 rear gear and the OD. For this build with a stock LS7 I closely copied the 2014 Z/28 with a tight 1-6 and a 3.73 rear gear. It will turn a little bit more RPM at 80 but should drive great.
Sent from my iPhone using Tapatalk