2nd project, Look out Todd I'm coming for u!

[bigtyme1]

Ok so were going full tilt pro touring on this one. Looking for only the best parts and top line sponsers. there will be no short cuts on this unit. Will start with a frame off, then full on off custom suspension, hand made. I'm going to fab the whole body myself and the custom interior. Sorry Tracey this ones for me to do. Going with 22" wheels, full tilt bed and custom gauges. As of now motor runs great but I may up grade before it's all over. Should be done for Good Guys next year and maybe SEMA if I get a sponser. Frank from Prodigy is first on my list. Mike ( His Son) helped me pick it up while he was up here doing my mini tubs. As alway Ben will be my designer he's done a fantastic job on Envy. Steve from HRBS will handle the custom Fab work and Mike from muscle Rodz will handle the custom one off suspension.. Will start with a design soon. Tony is going to fly in for the wireing, I figure he need the experience before he get his car back.

[bigtyme1]

I forgot, we are going to need a name for this, I'm having a hard time coming up with something.

[bigtyme1]

[Vegas69]

Good luck....

[bigtyme1]

Due to the economy I won't make it to vegas with it. your lucky

[Vegas69]

I posted that response before I saw the photos. hahahaha I knew you were pulling my leg when I saw 22" wheels!

[ArisESQ]

did someone Z the frame on that golf cart

[HRBS]

LOL.

Mark, remind me to tell you about the golf cart build contest we had at the track. A bunch of crazy guys made a bet who can have the fastest by the next points meet. None the less, ours had a snowmobile engine mounted to a trans axle and would smoke most cars on the road. It was about as safe as a fat kid on a tricycle !

[bigtyme1]

Yea I picked it up pretrty cheep a few years ago. I figured it will be good practice on aluminum. Worst case I scrap it.