66 is ready for paint need a few coments

[sacarguy]

well my 66 is almost done here is the car



here are the colors i have to work with

I have 1 gallon ready to spray of oxford whit,e 1 gallon of ua black, and 1 gallon of ford lazer red all spies hecker plus a quart of audi 07 silver to use for accents / stripes.

ill be using dupont 7900 high solids clear.

here are the jobs im leaning towards

the first
top half lazer red with a silver pin stripe with black body

similar to this but red where the copper is


the other is all black with lazer red strips just like the 07 gt-500s like this



what do you guys think ?

or can you give me any other ideas based on the colors i already have.

[waynieZ]

Scaryguy both look good but I'm partial to solid body with stripes.

[awr68]

Personally I would go with all black w/ the red stripes as shown in the last pic. Good luck with the paint...I know you are really excited!!

[lhkustoms]

I like the black with red stripes although i would get another 2 quarts of black if your gonna go that route. I always like to have 6 qts of base when doing a complete paint job. I would rather have extra then run out. anyways looking awesome it looks laser straight.

[paulk68]

black with red stripes for sure

[tgvettes]

hands down black with red stripes

Tonny

[sacarguy]

im not to worried about coverage with the black spies covers very well and its a black sealer plus the engine compartment is not body color its already done in semi flat so no reason to paint it black again.

[rwhite692]

Originally Posted by lhkustoms

I like the black with red stripes although i would get another 2 quarts of black if your gonna go that route. I always like to have 6 qts of base when doing a complete paint job. I would rather have extra then run out. anyways looking awesome it looks laser straight.

Agree it's nice to have some extra material but Gadzooks 6 qts of base (1.5 gallons) for an early mustang?

Do you shoot with a siphon gun?

[lhkustoms]

Originally Posted by rwhite692

Agree it's nice to have some extra material but Gadzooks 6 qts of base (1.5 gallons) for an early mustang?

Do you shoot with a siphon gun?

Just tryin to make a suggestion if he not painting the engine compartment or underside of hood and trunk 1 gallon should be enough I just like to always have a little extra just in case thats all. I used 2 gallons of base when i painted a 65 fastback recently granted it was a charcoal pearl but still i like to put 4 wet coats of base on even with a solid color and 4-6 wet coats of clear. gives it a deep shine just a personal preference.

[TonyG]

What does the Laser Red base look like? I know that the factory Ford Laser Red is a tri-coat. not sure what it would look like without all 3 steps. But if it is a bright red; then it would look great striped over the black.