...

Go Back   Lateral-g Forums > Technical Discussions > Chassis and Suspension
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 07-01-2007, 09:02 PM
Hdesign's Avatar
Hdesign Hdesign is offline
Senior Member
 
Join Date: Mar 2006
Location: wista mass
Posts: 1,261
Thanks: 0
Thanked 0 Times in 0 Posts
Default Air Ride...please help.

A friend has a Air Ride Shockwave system running in a newly "completed" 50 Chevy. It was working fine until today.

Pass side rear is not inflating at all, we can hear the switch trip for lowering the car. It doesn't seem to be a leak. Connections look good and there doesn't seem to be any grounding issues. Could it be a bad solenoid?

Any help will be greatly appreciated. Thanks!
__________________
Ben Hermance

Hermance Design
My Facebook
Reply With Quote
  #2  
Old 07-02-2007, 08:28 AM
Gordz32's Avatar
Gordz32 Gordz32 is offline
Senior Member
 
Join Date: Dec 2005
Location: Ferndale, WA
Posts: 312
Thanks: 2
Thanked 18 Times in 9 Posts
Default

as long as the all the wiring 's correct, I'd de. check out the solenoid. Chances are that its not the computer as well
__________________
67' El Camino: 468BBC, TH400, Grocery Getter
Reply With Quote
  #3  
Old 07-02-2007, 08:29 AM
fakesnake.com's Avatar
fakesnake.com fakesnake.com is offline
Senior Member
 
Join Date: Nov 2006
Location: Northern California
Posts: 106
Thanks: 0
Thanked 0 Times in 0 Posts
Default

try swapping rear air lines to confirm if it is a bag problem or solenoid problem.
__________________
www.fakesnake.com
1962 Mercury Monterey Convertible
Reply With Quote
  #4  
Old 07-02-2007, 09:17 AM
Hdesign's Avatar
Hdesign Hdesign is offline
Senior Member
 
Join Date: Mar 2006
Location: wista mass
Posts: 1,261
Thanks: 0
Thanked 0 Times in 0 Posts
Default

I was thinking of trying that, but didn't want to tear into it if someone had experienced this before. We'll give it a shot tonight. Thanks!
__________________
Ben Hermance

Hermance Design
My Facebook
Reply With Quote
  #5  
Old 07-02-2007, 11:38 AM
darren@ridetech's Avatar
darren@ridetech darren@ridetech is offline
Lateral-g Supporting Vendor
 
Join Date: Oct 2005
Location: Jasper,IN
Posts: 140
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Could be a number of different problems.....usually wiring. First step is to see if you have any power coming from the ecu. on the If you look at the valve harness at the ECU it will be the black wire on the bottom row. Disconnect that harness and see if any power is coming from the ECU.
Reply With Quote
  #6  
Old 07-02-2007, 01:55 PM
Hdesign's Avatar
Hdesign Hdesign is offline
Senior Member
 
Join Date: Mar 2006
Location: wista mass
Posts: 1,261
Thanks: 0
Thanked 0 Times in 0 Posts
Default

The guy who installed it said it could be a bad switch.....???
__________________
Ben Hermance

Hermance Design
My Facebook
Reply With Quote
  #7  
Old 07-03-2007, 08:48 AM
marolf101x marolf101x is offline
Supporting Vendor
 
Join Date: Oct 2006
Posts: 175
Thanks: 0
Thanked 0 Times in 0 Posts
Default

I think we'll need a little more information on this.

What compressor/control system is in the car? Does it use analog gauges and manual switches, or is it a digital control system?

If it is digital what does the display panel/user interface look like?

Does the battery have a decent charge? (the easiest way to check this, is to start the car. When the engine is running, the alternator is putting out 14.4V. Don't count on a battery charger. A running engine with a good alternator is the best solution to low voltage issues.)

When the RR will not inflate, will any other corner inflate? (We are checking tank pressure with this test. If you have low tank pressure, no corner will inflate. If the tank pressure is good, the other corners will inflate with no issues.)
Reply With Quote
  #8  
Old 07-10-2007, 03:41 PM
Hdesign's Avatar
Hdesign Hdesign is offline
Senior Member
 
Join Date: Mar 2006
Location: wista mass
Posts: 1,261
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Well, after that hiccup of the system not working, it seemed to fine throughout the rest of the week.

It's actually an AID brand product, not the Air Ride brand (don't know the reliability/quality of this brand). Analog gauges, rocker switches, plenty of battery charge, all other corners inflate fine. Sounds like a bad switch to me.

Thanks!
__________________
Ben Hermance

Hermance Design
My Facebook
Reply With Quote
  #9  
Old 07-18-2007, 08:15 AM
darren@ridetech's Avatar
darren@ridetech darren@ridetech is offline
Lateral-g Supporting Vendor
 
Join Date: Oct 2005
Location: Jasper,IN
Posts: 140
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Well, if you need any further assistance trouble shooting it, we'll do what we can.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:56 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net